TOMAX FASTENERS

• The ultimate fastener solution, with a simple "snap-on, pull-off" action, the TOMAX Fastener locks on all sides of the stud and will only detach when the cap is deliberately lifted.  Commonly found on boat covers and vintage car hoods, Ossian's TOMAX fastener Blister Packs are an essential part of any marine or automotive repair kit.

• Base Material: Heavy gauge brass.

• Finish: Heavy duty nickel plate. In each TOMAX Blister Pack, you will find 4 complete sets of 4 Buttons & Clinch Nuts, 4 Studs, and 1 Locking Key.
  Screws & Nuts are also supplied where required. Our Blister Packs are fully resealable, so you only have to use what you need when you need it. Full assembly instructions are given on the rear of each pack.

This is a selection of our most popular Fasteners.
We cater for all customer requirements and can offer special solutions where required. Ossian has a policy of continuous development and innovation within this specialist area for over 75 years.

Available Studs

SUPER - SPOT FASTENERS

• The engineered fastener solution, with a simple "snap on, pull off" action, the Super Spot fastener locks on three sides of the stud and will only detach from the fourth trademarked side by lifting the dot / spot.  Commonly found on boat covers, vintage car hoods and military applications, Ossian's Super Spot fastener Blister Packs are an essential part of any marine or automotive repair kit.
• Base Material: Heavy gauge brass with phosphor bronze spring.

•  Finish: Heavy duty nickel plate. Each Blister Pack contains 5 complete sets of the Super Spot Fastener & Clinch Plate and Studs.
  Screws & Nuts are also supplied where required. Our Blister Packs are fully resealable, so you only have to use what you need when you need it.Full assembly instructions are given on the rear of the pack.

• Available Studs
  ***Please note - Super Spot fasteners are fully compatible with Lift the DOT.

The easiest fix and undo fixing engineering solution. The "Super Spot" bindings are closed on three sides of the male, it will only be unlocked on the fourth side where the "Super Spot" mark is located. They are relevant on the hoods of vintage boats and cars. Ossian's "Super Spot" in blister packs are an essential part of any marine or automotive repair kit. The blisters can be fully resealed, so you only really use them when you need them. Our "Super Spot" bindings are fully compatible with "Lift The DOT" bindings.

TURNBUTTONS

The common sense fastener solution, with a simple "twist to lock" action, the turnbutton fastener is positively engaged by twisting the knob.  Commonly found on boat covers (especially narrowboat cratch covers) and vintage car hoods, an Ossian Turnbutton Blister Pack is essential for any marine or automotive repair kit.  Different heights are available for all applications.

Base Material: Heavy gauge brass or 316 Stainless Steel - Ossian are the world's sole manufacturer of 316 Stainless Steel turnbuttons.

Standard Finishes: Heavy duty nickel plate or polished self coloured 316 stainless steel.
Each Blister Pack contains 5 complete sets of Prong Oval Eyelets & Clinch Plates and Turnbuttons.*
Screws are also supplied where required.
Our Blister Packs are fully resealable, so you only have to use what you need when you need it.
Full assembly instructions are given on the rear of the pack.

Available Sizes

➤ 316 Stainless Steel - Marine Grade

➤ Brass Nickel Plated

PRESS STUD FASTENERS

The simple fastener solution, with an easy "snap-on, pull off" action, the press stud (or durable) fastener has a heavy-duty spring to limit the risk of unwanted detachment and is available with a complete range of terminations for all applications.  Commonly found on boat covers and canopies, car hoods, awnings, protective clothing and numerous other places, every marine, vintage car, camping, motorhome and caravan repair kit should include an Ossian Durable Press Stud Fastener Blister Pack.

Base Material: Heavy gauge brass or stainless steel.
Standard Finishes: Heavy duty nickel plate, black oxy or polished self coloured stainless steel.

Specials: A Variety Of Coloured Caps Are Also Available.

Each Blister Pack contains 10 full sets of either 3 or 4 part Press Stud Fasteners and 1 set of Closing Tools.
Refill packs are also available without the tools. (Please contact us for details).

Our Blister Packs are fully resealable, so you only have to use what you need when you need it.

Full assembly instructions are given on the rear of the pack.

What each pack contains

➤ 316 Stainless Steel - Marine Grade

➤ 304 Stainless Steel

➤ Brass Nickel Plated

➤ Coloured Buttons

➤ White

➤ Black

➤ Blue

EYELETS & WASHERS

Brass sail eyelets and washers, available in a variety of sizes and finishes, reinforce and strengthen perforations in fabrics.
Ossian's eyelet kits are ideal for maintaining and repairing boat covers, canopies, sails, tarpaulins, camping equipment, awnings, upholstery, etc.

Base Material: Brass
Standard Finishes: Polished self coloured brass, nickel-plated or black oxy.

Each Blister Pack contains complete sets of Eyelets & Washers and 1 set of Closing Tools.
These can also be supplied as Refill packs without the Closing Tools.

Our Blister Packs are fully resealable, so you only have to use what you need when you need it.

Full assembly instructions are given on the rear of the pack.

∅ Inside Diameter Eyelets After Closing

∅ 5.1 mm

∅ 6.7 mm

∅ 8.0 mm

∅ 9.5 mm

∅ 11.1 mm

∅ 12.7 mm

∅ 15.9 mm

➤ Plastic Eyelets & Washers

GROMMETS & SPUR TOOTH WASHERS

Brass grommets and spur tooth washers are for use in open-weave fabrics, or when the material is under constant shear strain.
Ossian's Grommet Blister Packs are ideal for marine and other canvas repair kits.

Base Material: Brass
Standard Finishes: Polished self coloured brass or nickel plated.

Each Blister Pack contains complete sets of Grommet Eyelets & Spur Tooth Washers and 1 set of Closing Tools.
These can also be supplied as Refill packs without the Closing Tools.

Our Blister Packs are fully resealable, so you only have to use what you need when you need it.

Full assembly instructions are given on the rear of the pack.

Please contact us for details

∅ Inside Diameter Grommets After Closing

∅ 8.3 mm

∅ 9.5 mm

∅ 11.9 mm

WIRE ROPE GRIPS

The Wire Rope Grips is the essential item for heavy-duty rigging rope, wire and cable. Suitable for marine applications you will can use these for anchoring, making loops, adjusting length.

​Type 316 Stainless Steel has superior rust resistance and greater strength than 304 stainless. Easy to attach, remove & reuse with hand tools.

Each Blister Pack contains 4 complete sets of Wire Rope Grip from sizes of 2mm to 8mm.
Choose the size that best suits your needs.

Our Blister Packs are fully resealable, so you only have to use what you need when you need it.

Full assembly instructions are given on the rear of the pack.

TWO PART RIVETS

The solution for reinforcing a seam or binding two or more pieces of material together, Ossian's two part rivets (or Caps & Backs) "snap" and stay together during assembly.  Ossian Fasteners Two Part Rivet Blister Packs can be used with materials such as leather, canvas, textiles, paper, metal, plastic or a mixture of these and are ideal for leather goods, shoes, helmets, straps, clothing, DIY, etc, giving a good aesthetic to both sides of the finished product.

Base Material: Brass.
Standard Finishes: Polished self coloured brass or nickel plated.

Each Blister contains complete sets of Caps & Tubular Rivets with 1 Set of Closing Tools.
These can also be supplied as Refill Packs without the Tools. (Please contact us for details).

Our Blister Packs are fully resealable, so you only have to use what you need when you need it.

Full assembly instructions are given on the rear of the pack.

Available Sizes

∅ Caps Diameter Rivets

∅ 7 mm

∅ 10.5 mm